|
01-07-2019, 06:07 AM
|
#1
|
Junior Member
Join Date: Sep 2018
Posts: 16
|
TV antenna
So my original antenna doesn't working in my 2012 214wsd. When I bought the camper it came with a king antenna new in the box, that has a different mount. Has anyone ever swapped this out for a different style and do you have any advice for a leak free, worry free install. Also, is king a good replacement brand? I see receipts where the antenna was replaced a few times and the previous owners claims that it would work for a few and then go out about a year later. It was always replaced with the same Jensen antenna that it came with.
thanks
__________________
|
|
|
01-07-2019, 09:15 AM
|
#2
|
Site Team
Join Date: Oct 2009
Location: Arizona
Posts: 1,287
|
It seems rather odd that an antenna would work for a while and then quit. Makes me think there is a problem in the connection/cabling rather than the antenna itself. Or else in the amplifier. Do the receipts show purchases of coax cable?
If not, rather than replacing the whole antenna I would check that the amplifier is working properly and then make sure that all the connections are good. You might even try replacing the coax cable connectors in case one of them wasn't made up properly.
__________________
__________________
2011 Chevy Silverado Crew Cab 4X4
2009 210 WBS
Prodigy P3
|
|
|
01-07-2019, 03:22 PM
|
#3
|
Member
Join Date: Jan 2018
Location: Placida, FL
Posts: 71
|
__________________
Daz
2012 FunFinder X-214WSD
2005 F150 FX4
|
|
|
01-08-2019, 06:22 AM
|
#4
|
Junior Member
Join Date: Sep 2018
Posts: 16
|
I was also considering something like this. do you have any pictures?
thanks
|
|
|
01-08-2019, 05:42 PM
|
#5
|
Member
Join Date: Jan 2018
Location: Placida, FL
Posts: 71
|
Quote:
Originally Posted by FF-214wsdf
I was also considering something like this. do you have any pictures?
thanks
|
I posted a couple that I had so you can get a general idea. Are they not showing up in my post above?
We're heading out Sunday for a week - I'll try and remember to shoot some then while it's set up. Anything specific you want to see or just the antenna setup in general?
Daz
__________________
Daz
2012 FunFinder X-214WSD
2005 F150 FX4
|
|
|
01-09-2019, 06:15 AM
|
#6
|
Junior Member
Join Date: Sep 2018
Posts: 16
|
ah, I see the pictures now. thanks! that's big! looks good! Is there anything else you have done to your 214WSD to improve it? I am currently working on an extension to attach to the dinette to make it into a 54x80 full bed. I think it is currently 41x80 and both of my daughters sleep there.
thanks
|
|
|
01-10-2019, 06:41 AM
|
#7
|
Member
Join Date: Jan 2018
Location: Placida, FL
Posts: 71
|
We have made several modifications/improvements, the biggest of which won't work for you since you need to sleep more than two, but some of the others might interest you:
We found that the dinette seats just weren't that comfortable and didn't work well for watching TV/movies and or reading so we completely removed the dinette and replaced it with two chairs. I reused the original table top, turned it 90 degrees and added folding adjustable height legs so it can be removed and used anywhere. It really opened up the space and is very comfortable now. We did lose a little storage by eliminating the dinette so I added doors to the sides of the bed platform to give access to that storage area without having to lift the bed.
A major improvement was adding an electric tongue jack in place of the old manual that came with the trailer, we opted for a 4500 lb Husky with remote. Hooking up and connecting the bars is super easy and quick now - I don't even have to take the jack cover off or get out of the truck until it's time to close the ball latch and connect the bars.
To save amps and brighten up the interior I changed out all of the lights to LEDs.
I reworked the water system a little bit and moved the onboard water pickup point from the side of the tank to the bottom which now allows us to use the full capacity of the water tank. Also added an undersink filter system and dedicated drinking water spigot. Did a few other small galley things like adding a folding stove cover and installing a new faucet too.
We never use the shower (we generally stay either in parks with bath houses or boondocking where we can't spare the water) so I removed the shower fixture and door and turned that space into a storage area. It's perfect for hanging wet stuff and is a great spot for our laundry bin.
Most of our other modifications/improvements have been maintenance/repair related (rebedding windows/hatches, replacing awning, outdoor speakers, vents and covers, etc.).
All in all, we're very happy with our trailer and are getting good use out of it. We bought it in February of 2018 and have 80 nights in it so far and leave for another week-long trip this Sunday.
__________________
Daz
2012 FunFinder X-214WSD
2005 F150 FX4
|
|
|
01-10-2019, 12:35 PM
|
#8
|
Senior Member
Join Date: Jan 2012
Location: South Dakota
Posts: 3,105
|
I replaced the cheap fixed direction factory Jensen antenna on my XT276 several years ago with a King antenna. It was a pretty easy change over.
I had to enlarge/slightly relocate the roof mount location to get the signal indicator and rotator located inside a cabinet. My boy did the connections.
The King antenna has been on the roof for about 3 years , never any leak as sealed it good when installed.
Also, very happy with the reception. When parked at home, the Jensen would get one clear channel and 1 snowy channel. Now I can pickup 6 channels in the yard so yes, a big improvement IMO.
__________________
2012 Fun Finder XT 276 Toy Hauler & Harley Davidson Ultra Classic with Condor wheel chock
2014 Dodge Ram 2500 AT 4X4 Crew Cab 6.4 L Hemi, 373 gears, tow package, Rambox option, Revolver X2 tonneau cover, Equal-I-zer anti-sway hitch.
|
|
|
01-11-2019, 05:26 PM
|
#9
|
Member
Join Date: Jan 2018
Location: Jamestown, SC
Posts: 46
|
Our factory antenna has worked well for us. Normally within 30 miles of a major market. We are going cross country starting in Feb till ? If the antenna is not receiving I carry a Tailgater. We rebuilt the SO flooring, replaced awning fabric, fixed some plumbing, and other problems. I carry pex tubing, fittings, and pex tool. Also caulk, butyl tape, misc tools, floor jack, and those things I can’t repair we have Good Sam ( used in UT and SC, all favorable) I have annual servicing done by a reputable trailer shop, run good tires (GY Endurance). We love our BTHRM, exterior KIT, and walk around bed. And I follow the forum, at least weekly to garner the sages’ advice.
__________________
FunCamper
2010 FF X215WSK
2005 F-150 Fx4
|
|
|
01-12-2019, 09:18 AM
|
#10
|
Member
Join Date: Feb 2017
Location: McKinney, TX
Posts: 84
|
Also something to think about, do you have an old tv that only does analog signals? I don't remember the year they switched over to digital, but if you have an older analog tv it will not work with the standard digital signals that are now used. I thought the problem was the antenna, cables, or amplifier. After all of those checked out, I brought out a newer tv from the house and it worked perfectly. Used it as an excuse to upgrade from the factory 13" to a 19". This may or may not be your issue at all, but throwing it out there in case it helps out someone else.
|
|
|
01-12-2019, 06:32 PM
|
#11
|
Senior Member
Join Date: May 2010
Location: fort salonga NY
Posts: 191
|
My 2007 189fbs had a digital antenna
__________________
2007 Fun Finder 189fbs Scrapped 4/16
2006 Hummer H3 1983 Honda CX650C
1968 Oldsmobile 442
2017 Keystone Summerland 1750RD
|
|
|
01-12-2019, 07:16 PM
|
#12
|
Member
Join Date: Jan 2018
Location: Placida, FL
Posts: 71
|
Quote:
Originally Posted by fourfourto
My 2007 189fbs had a digital antenna
|
My 2012 214WSD does too but it sucks and doesn't pull in much of anything.
__________________
Daz
2012 FunFinder X-214WSD
2005 F150 FX4
|
|
|
01-13-2019, 08:36 AM
|
#13
|
Member
Join Date: Feb 2017
Location: McKinney, TX
Posts: 84
|
Quote:
Originally Posted by fourfourto
My 2007 189fbs had a digital antenna
|
but if the tv is not capable of receiving digital signals you on't get anything regardless of how good the antenna is. I think my FF is a 2006 and that is right around when the system was moving to digital over-the-air signals. My tv was analog only and by the time I bought it two years ago all broadcasts have been moved to digital.
|
|
|
01-13-2019, 11:31 AM
|
#14
|
Member
Join Date: Jun 2017
Location: Painted Post, NY
Posts: 44
|
digital antennas
Don't be fooled by all the hype from companies trying to sell "digital" antennas - an antenna's an antenna. Just for kicks, from a hobbyist Internet plan, I built an approximately 2'x2' antenna out of stripped Romex house wire, some scrap 1x2s and a 75 ohm balun (antenna-coax adapter). It drew in exactly as many channels as one of those poorly built antennas we see advertised these days. And the channels were crystal clear. My sons ended up using it in their apartment for several years. Yes, your problem is likely due to a bad connection, a bad amplifier or maybe even coax that's been bent too tight and broken inside. If you expect to do much coax work I recommend getting an inexpensive coax tester. It screws on both ends of a length of coax and lights up if the wire's good. Plus, you can wiggle inline connectors to check them.
|
|
|
01-19-2019, 07:01 PM
|
#15
|
Member
Join Date: Jan 2018
Location: Placida, FL
Posts: 71
|
Or you could just have a crappy OEM antenna.
__________________
Daz
2012 FunFinder X-214WSD
2005 F150 FX4
|
|
|
01-29-2019, 02:04 PM
|
#16
|
Member
Join Date: Dec 2008
Location: Southern California
Posts: 92
|
I had an intermittent antenna issue. It turned out the coax connectors weren't crimped properly and the shield was touching the center conductor. I replaced and it's been working fine since.
__________________
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|