Additional Storage - tongue rack
I looked at several ways to add some additional storage to our 189FBR. Since it has no rear bumper, a rack there was not possible, so I built a tongue rack. It is directly above the LP tanks and is supported with brackets on the tongue frame. Approximate size is 18"x48" and is 24" high. I originally wanted the rack to hold the portable gas grill, folding table, chairs, and some block.
Because of the height, I redesigned it last week to hinge the front of the rack to make it easier to lift things into it.
It is a simple rack to build with a little metal and a welder so should be fairly inexpensive if you have to have a welding shop build it. I would be happy to send pictures/measurements if you email me at: lvahl(at)cox.net
Lowell
|
Linear Mode
