I'll post this for future users since I'm guessing that fla2ri found his information elsewhere or gave up by now
The Weber Baby Q series of grills adapt quite readily to use with the low pressure quick connects on the FunFinders. The Q series from Weber utilize a burner control valve that is not integral to the regulator, i.e., you can remove the regulator and still have a funcitoning burner control valve.
Remove the support screws for the burner assembly to make access easier. Remove the regulator and install the male quick connect fitting. Re-install the burner assembly. Done.
You can get pre-made hoses with the connects already on them, along with the male fitting from these folks:
http://www.propaneproducts.com/catal...-plug-472.html
I have been using the Q120 for years with my 210WBS, but, there are other grill manufacturers out there that make grills that have the regulator as a seperate piece from the burner control valve. I have a 4' hose and a 12' foot hose. If it isn't raining, I use the long hose to get the grill out from under the awning, if it is raining or I don't have the awning deployed, I'll use the short hose just so that I don't waste LP filling a long hose...