Wheel bearing grease

[uct]

What type and brand is recommended 2006 210x Thanks

[thefarside]

The best advice is to contact the manufacture of the axle and use there recommendations. (should be a label on the axle)
It’s always a good practice to thoroughly clean bearings in a safety solvent before repacking them.


John

[fourfourto]

Marine blue, no need to take out bearings if you have the factory buddy bearing setup.
Dont use harbor frieght marine grease ,it says dont mix with other types of grease(special stuff) all others should be fine check label.
Pep boys MG is good.

[Eagle]

I use Slick 50 GP grease that is approved for axle bearings on the tube. Also checked with the company that makes it and they assured me it exceeded the axle makers requirements.

[M&M]

Our trailer has Lippert Axils with the SuperLube Hubs. The Cruiser Owner's Manual that came with the trailer says to use grade 2, high temperature automotive grease with a minimum of 440 degrees dropping point. I think high temperature grease is usually if not always red in color.

[Eagle]

Slick 50® One Grease®

A multi-purpose grease suitable for automotive, marine and industrial applications. Fortified with Slick 50® PTFE Chemistry, Slick 50® One Grease® provides friction and heat protection. It has excellent shear stability, load carrying ability and water, rust and oxidation resistance. Slick 50® One Grease® meets or exceeds all requirements for #2 NLGI Service Classification GC-LB (automotive wheel bearing and chassis lubricants). [The NLGI classification system is based on ASTM D 4950 performance requirements.]

* Suitable for automotive, marine and industrial applications
* Protects against friction and heat
* Fortified with Slick 50® PTFE Chemistry
* Excellent shear ability and load carrying capability
* Water, rust and oxidation resistance

http://www.slick50.com/gif/products/onegrease.jpg


and IIRC, the dropping point was 550

as for color, there is red, white, grey, green, blue/green, black, dark brown,etc. I doubt the coloring dye aids lubrication or raises the dropping point.

ALSO - Slick 50 grease is what I use with satisfaction. Everyone else if free to use whatever brand they wish.