Working on a recently purchased 2011 210WBS. The wall near the front has separated. Is this common? Tried screwing it together but there only seems to be foam behind the wall. The seam was covered with tape. I’ve attached an image but it is rotated 90 degrees.
That looks like the trim. Check the wood under the carpet if is good then just take a thin trim down by the carpet. Mine did that on the closet trim by the emergency window. The window had not been open fir so long the weep hole to the bottom got road grime and plugged it. I just trimmed the bottom edge then glue it back in place.
Wall separation
Linear Mode
