2007 X210 TV issue

[raecarr]

Bought a used Fun Finder....can't get the antenna to work. Could someone please tell me what the connections are like if you pull out the wall connections? The previous owner had a satelite dish hooked up and I think maybe he dropped the antenna wire down behind the wall. All I have is one white cable connected to the back of the wall plate. Thanks for your help

 

[fourfourto]

There is a button when pushed a LED light goes on and the antenna will work when off cable will work.

 

[raecarr]

2010 210X tv issue

There is a button when pushed a LED light goes on and the antenna will work when off cable will work.

Yes, I know, but the button does not light up - that's why I think he dropped a cable when he was connecting his sat dish. So I need to know what cable/s are connected to the wall plate (unscrewing the wall plate and pull it out from wall to look)

 

[fourfourto]

when you take off the switch plate check for 12v power also,maybee they disconected the boost for the antenna ?

 

[raecarr]

when you take off the switch plate check for 12v power also,maybee they disconected the boost for the antenna ?

The boost?? What does that look like? Anybody have a picture of the connections behind the wall plate? Like I said I only have one cable connected to the wall plate from behind....a visual or good description of how the connections are set up behind the plate would be extremely helpful. Thanks for your help so far....If you have a picture - send it to raecarr@hotmail.com

 

[fourfourto]

I never took off that plate ?
I assume there is a power wire for the led light something has to make it light up ? there should be a wire going to it.
maybe call fun finder or a dealer and see if they can send you a diagram.