Ted Kenner
Member
- Joined
- Oct 4, 2011
- Messages
- 13
On my last trip the right rear stab. Jack failed.i pulled the switch and a bare red wire appeared. I pulled the panel and discovered that too large a connector head been used to connect the power wires to the thermal breaker.Crimpped but not secure.
Sloppy wiring at factory which could have caused a trip to a dealer for the non handyman.
A bit more oversight at the plant is in order as I have had many such problems.
Ted.
Sloppy wiring at factory which could have caused a trip to a dealer for the non handyman.
A bit more oversight at the plant is in order as I have had many such problems.
Ted.
