REVISED:Misc Slide Manuals Online

I may be mistaken, but I don't believe the following is possible:

"When room is completely in, plug both motors back in to the control board. (This applies brake for road travel.)"

This is because the control board is located under the fridge, which cannot be accessed when the slider is closed.
 
210uds slide

revised: I spoke with Mr. Gentry CruiseRV today. He said the information was slow coming, even for him for the location of the 210UDS slide circuit board. It is under the fridge. At some point in the 2013 they corrected the access problem by putting it in the front exterior storage area under the wardrobe on the slide side. I did confirm that on our unit today. I am relieved to find it is so easy to access for us. Unfortunately, not such good news for the models with the circuit board under the fridge.
 
I checked the location of the circut board which on our 210UDS is located undereath the fridge. Which is a simple reach. To reach this through the outdoor shower would take another 3 feet added to my arm length as my biggest obstacle accessing it this way would be the water heater blocking the circut board. Am I missing something or did the outdoor shower location change; ours is in the back just above the bumper.
Thanks for the info as it may come in handy
 
Revised info, 210uds slide override

Thank you Regis for that input, I revised my original post about the 210uds circuit board slide access. It is frustrating that each unit doesn't come with specific instructions.
So, based upon your observations, would you agree the 210uds slide manual override would have to be done as shown in the video, from the slide motor itself not the circuit board?

Lippert Schwentek Video 01:54 in this video....

Here is another thread on this site about slideouts
http://www.funfinderclub.com/phpBB2/viewtopic.php?p=4186&sid=643161e4ebb47e7c563824bac2454fee
 
I'm going to check it out . This is something to be aware of; locations and access to the items pertaining to the slide operation instead of waiting 10 minutes before the dam breaks and the flood water come rushing.
 
Manual Slide Override 210uds

I spoke with Mr. Gentry CruiseRV today. He said the information was slow coming, even for him for the location of the 210UDS slide circuit board. It is under the fridge. At some point in the 2013 they corrected the access problem by putting it in the front exterior storage area under the wardrobe on the slide side. I did confirm that on our unit today. I am relieved to find it is so easy to access for us. Unfortunately, not such good news for the models with the circuit board under the fridge.
 
Ok I'm back and would say it would be best to work from the slide motor. If there is not easy access to the controller as with those under the fridge area. Since it was made known that the controller circut board was relocated to under the closet; I'd like to know when this was done as my controller circut board is under the fridge and our trailer is a 2013 model.
There appears to be what seems like a few feet of cord wrapped up thats attached to the controller. Might do me good to see just how long the cord is and if i can relocate the controller circut board. Seems to me it would be best to have the controller in an area that doesnt have a lot of plumbing as under the fridge, waterpump, water heater.
 
roy said:
Any idea where its located on a 276 ? I have not seen anything like that so far.
Click to expand...


For the little controller box, Take a look under the front bed in the water heater compartment.
 
You must log in or register to reply here.

New posts

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom