Slide out

[seattlegolfer41]

Hello,
I just brought my new 210UDS home last night and everything looks great. My only question is how would I get the slide-out in if either I have no power or maybe the motor burnt out? Thanks for the help.

 

[runner421]

Might watch this video:

about 1:52 into the video.[/url]

 

[dmenger]

Slide Wiring Harness

Hello,

Another slide question: The plastic slide wiring harness on my FF 198FDS has come undone from the trailer frame. The screw is still in the harness, but I am not sure where to secure it back to. No holes are evident . . . Thanks for your help.

 

[brackenlip]

Re: Slide Wiring Harness

Hello,

Another slide question: The plastic slide wiring harness on my FF 198FDS has come undone from the trailer frame. The screw is still in the harness, but I am not sure where to secure it back to. No holes are evident . . . Thanks for your help.

Do you have a picture ? I'm not clear exactly on what you are asking. If you need it, I can snap a photo of how mine looks under there.

george

 

[dmenger]

Thanks, George.

In the end, I was able to secure the plastic wiring harness to the chassis by drilling another hole in the harness and bolting it through an existing hole in the frame. It worked for transport, but the bolt had to be removed to get the slide out . . . it is now at the dealiership for repair. Thanks agin for the reply.